2.
After loosening the mounting bolts and then push it up and remove the rear seat cushion assembly (B).
Tightening torque :
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~18.8 lb-ft)
Disconnect the rear seat cushion heater connector (A) from the trunk inner side.
After loosening the mounting bolts and then push it up and remove the rear seat cushion assembly (B).
Tightening torque :
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~18.8 lb-ft)
Install in the reverse order of removal.
Make sure the connector is connected properly.
Remove the rear seat cushion assembly.
Fold the rear seat back assembly.
After loosening the mounting bolts, then remove the rear seat back assembly (A).
Tightening torque :
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~18.8 lb-ft)
Install in the reverse order of removal.
