4.
Remove the center lower cover (A) after loosening the screws.
Disconnect the negative (-) battery terminal.
Remove the heater & A/C control unit.
(Refer to Heating,Ventilation, Air Conditioning - "Heater & A/C controller unit(Manual))
(Refer to Heating,Ventilation, Air Conditioning - "Heater & A/C controller unit(DATC))
Remove the floor console assembly.
Remove the center lower cover (A) after loosening the screws.
Remove the BCM unit. (in the order as below)
Disconnect the connectors (A) from the BCM unit.
Loosen the mounting nuts (B).
Remove the BCM unit (D) after disconnecting the connector (C) from the BCM unit.
Install the BCM unit.
Install the center lower cover.
Install the floor console assembly.
Install the heater & A/C control unit.
Connect the negative (-) battery terminal.
The body control module can diagnose by using the GDS more quickly.
The BCM communicates with the GDS and then reads the input/output value and drives the actuator.
To diagnose the BCM function, select the menu of model and body control module.
Select "Input/output monitoring", if you will check current data of body network system. It provides input/output status of each module.
BCM service data, CLU service data, SJB service data
If you will check each module data operation forcefully, select "Actuation test".
If you want to change user option, select “user option”.
