1.
Check for continuity and measure the resistance between terminals.
No. | Description | No. | Description |
1 | Heater (+) | 3 | NTC (-) |
2 | NTC (+) | 4 | Heater (-) |
Standard value (Fabric / Leather)
Cushion : 1.14 Ω ± 10%
Back: 1.04 Ω ± 10%
Set : 2.18 Ω ± 10%
Check for continuity and measure the resistance between terminals.
No. | Description | No. | Description |
1 | Heater (+) | 3 | NTC (-) |
2 | NTC (+) | 4 | Heater (-) |
Standard value (Fabric / Leather)
Cushion : 1.14 Ω ± 10%
Back: 1.04 Ω ± 10%
Set : 2.18 Ω ± 10%
Operate the seat heater after connecting the connector, and then check the NTC by measuring the temperature of seat surface.
1st | 2nd | 3rd | |
Cushion (±2°C) | 36°C | 39°C | 42°C |
Back (±2°C) | 40°C | 45°C | 50°C |
Check fo continuity and measure the resistance between terminals.
No. | Description | No. | Description |
1 | Battery (+) | 5 | LED Low |
2 | IGN 1 | 6 | Ground |
3 | LED High | 7 | Heater switch |
4 | IGN 2 | 8 | - |
Operate the seat heater after connecting the connector, and then check the thermostat by measuring the temperature of seat surface.
1st | 2nd | |
Cushion (±2°C) | 36°C | 39°C |
