Inspection
Power Window Main Switch Inspection
1.

Disconnect the negative (-) battery terminal.

2.

Remove the front door trim.

(Refer to Body - "Front Door Trim")

3.

Disconnect the connector from the power window switch module.

4.

Check for continuity between the terminals in each switch position according to the table.

[Driver/Passenger Safety]
[Driver Auto Down]
5.

Remove the power window switch(A) after loosening the screws.

Passenger Power Window Switch Inspection
1.

Disconnect the negative (-) battery terminal.

2.

Remove the front door trim panel.

(Refer to Body - "Front Door Trim")

3.

Disconnect the connector from the switch.

4.

Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.

[Auto]
[Manual]
5.

Remove the power window switch(A) after loosening the screws.

Rear Power Window Switch Inspection
1.

Disconnect the negative (-) battery terminal.

2.

Remove the rear door trim panel.

(Refer to Body - "Rear Door Trim")

3.

Disconnect the 8P connector from the switch.

4.

Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.

5.

Remove the power window switch(A) after loosening the screws.

Яндекс.Метрика