Check that the switch operates properly after disconnecting the room lamp connector (A).

Disconnect the negative(-) battery terminal.

Carefully remove the lamp lens (A) from the room lamp with a flat-tip screwdriver.

Replace the bulbs (A) and remove the screws if it is necessary.

Remove the room lamp assembly (A) after disconnecting the connector.

Disconnect the negative (-) battery terminal.

Remove the vanity lamp (A) using a screwdriver or remover and then disconnect the connector (B).

Reconnect the connector.

Install the room lamp assembly.

Install the lens.

Reconnect the vanity lamp connector.

Install the vanity lamp.