Disconnect the negative(-) battery terminal.

Remove the lighting switch of the multi-function switch.

(Refer to Multifunction Switch)

With the front fog lamp switch, make sure that continuity exists between the terminals below.

If continuity is not as specified, replace the multi-function switch.

Disconnect the negative(-) battery terminal.

Remove the front bumper cover.

(Refer to Body - "Front Bumper Cover")

Remove the front fog lamp connectors (A) from the front bumper.

Remove the front fog bulb (A) turning it in the counterclockwise direction.

Remove the front fog lamp assembly (A) after loosening the screws.

Install the front fog bulb.

Reconnect the lamp connector.

Install the front bumper cover.