3.
Place a passenger airbag on the crash pad and tighten the passenger airbag mounting bolts.
Tightening torque :
5.5 ~ 6.5 N.m (0.56 ~ 0.66 kgf.m, 4.1 ~ 4.8 lb-ft)
Remove the ignition key from the vehicle.
Disconnect the battery negative cable from battery and wait for at least three minutes before beginning work.
Place a passenger airbag on the crash pad and tighten the passenger airbag mounting bolts.
Tightening torque :
5.5 ~ 6.5 N.m (0.56 ~ 0.66 kgf.m, 4.1 ~ 4.8 lb-ft)
Install the crash pad.
(Refer to Body - "Main crash pad assembly")
Connect the passenger airbag connector.
Tighten the passenger airbag mounting bolts.
Tightening torque :
8.0 ~ 9.0 N.m (0.82 ~ 0.92 kgf.m, 5.9 ~ 6.7 lb-ft)
Reinstall the glove box housing.
(Refer to Body - "Glove box housing")
Reconnect the battery negative cable.
After installing the passenger airbag (PAB), confirm proper system operation:
Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.
