Installation
1.

Install in the reverse order of removal.

caution

After replacement or reinstallation procedure of the valve body assembly, must perform procedures below.

note
●

Adding Automatic Transaxle Fluid(ATF).

(Refer to Hydraulic System - "Fluid")

●

Perform Transaxle Control Module(TCM) learning after replacing the valve body to prevent slow transaxle response, jerky acceleration and jerky startup.

(Refer to Automatic Transaxle Control System - "Repair procedures")

●

Replace the gasket (A) before reinstalling the valve body cover.

Яндекс.Метрика