2.
Remove the radiator upper hose (A).
Remove the cooling fan.
(Refer to Cooling System - "Cooling Fan")
Remove the radiator upper hose (A).
Remove the radiator lower hose (B).
Install the radiator hoses as shown illustrations.
Remove the filler neck assembly (A).
Tightening torque :
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)
Disconnect the ATF cooler hoses.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
Remove the front bumper cover.
(Refer to Body - "Front Bumper")
Remove the head lamps.
(Refer to Body Electrical System - "Head Lamps")
Remove the radiator upper bracket (A).
Remove the A/C condenser (A) from the radiator assembly and then lift up the radiator assembly.
Installation is reverse order of removal.
Fill with engine coolant.
(Refer to Cooling System - "Coolant").
Start engine and check for leaks.
Recheck engine coolant level.
