2.
Remove the battery (A) and ECM (B).
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the battery (A) and ECM (B).
Remove the master cylinder.
(Refer to Master Cylinder)
Remove the snap pin (A) and clevis pin (B).
Remove the mounting nuts (A).
Tightening torque:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)
Disconnect the vacuum hose (A) from the brake booster.
Remove the brake booster (B).
