6.
Repeat the step 4 two or three times.
(until there is no bubble in the fluid)
Tightening torque:
6.8 ~ 9.8 N.m (0.7 ~ 1.0 kgf.m, 5.0 ~ 7.2 lb-ft)
Use the specified fluid. Avoid mixing different brands of fluid.
After disconnecting a cap from the clutch release cylinder air bleeder, insert a vinyl hose in the plug.
Refill the clutch master cylinder with the specified fluid.
Specified fluid: SAE J1703 (DOT 3 or DOT 4)
Loosening the plug screw, press and release the clutch pedal about 10 times.
Tighten the plug (A) during the clutch pedal pressed. Afterwards, raise the pedal with a hand.
After pressing the clutch pedal 3 times more, loosen the plug (A) and re-tighten it with the pedal pressed. Raise it again, then.
Repeat the step 4 two or three times.
(until there is no bubble in the fluid)
Tightening torque:
6.8 ~ 9.8 N.m (0.7 ~ 1.0 kgf.m, 5.0 ~ 7.2 lb-ft)
Refill the clutch master cylinder with the specified fluid.
Specified fluid: SAE J1703 (DOT 3 or DOT 4)
