1.
Disconnect the M-terminal (A) on the magnet switch assembly.
Disconnect the M-terminal (A) on the magnet switch assembly.
After loosening the screws (A), detach the magnet switch ssembly (B).
Loosen the through bolts (A).
Remove the brush holder assembly (A), armature assembly (B) and yoke assembly (C).
Remove the gasket sheet (A) and lever stop (B).
Remove the reducer assembly (A) and lever (B).
Press the stopper (A) using a socket (B).
After removing the stop ring (A) using stop ring pliers (B).
Disconnect the stopper (A), overrunning clutch (B) and internal gear (C).
Using a suitable pulling tool (A), pull the overrunning clutch stopper (C) over the stop ring (B).
Reassembly is the reverse of disassembly.
