Item | Specification |
Primary Coil Resistance (Ω) | 0.75 ± 15% [20℃ (68℉)] |
Secondary Coil Resistance (kΩ) | 5.9 ± 15% [20℃ (68℉)] |
Item | Specification |
Type | LZKR7B-DE |
Gap | 0.7 ~ 0.8 mm (0.0276 ~ 0.0315 in.) |
Item | Specification |
Capacitance (uF) | 0.47 [1KHz] |
Insulation resistance (MΩ) | 1,000 [DC 500 V/1 Min] |
Item | Specification |
Rated voltage | 13.5V , 90A |
Speed in use | 1,000 ~ 18,000 rpm |
Voltage regulator | IC Regulator built in type |
Regulator Setting Voltage | 14.55 ± 0.2V |
Temperature Gradient | -7 ± 3mV / °C |
Item | Specification |
Model type | CMF45L-DIN |
Capacity [20HR/5HR] (AH) | 45 / 36 |
Cold Cranking Amperage (A) | 410 (SAE) / 330 (EN) |
Reserve Capacity (Min) | 80 |
Model type description
Cold Cranking Ampere (CCA): Cold Cranking Amps is a rating used in the battery industry to define a battery's ability to start an engine in cold temperatures.
The rating is the number of amps a new, fully charged battery can deliver at -18 °C(-0.4 °F) for 30 seconds, while maintaining a voltage of at least 7.2 volts for a 12 volt battery.
The higher the CCA rating, the greater the starting power of the battery.
RESERVE CAPACITY (RC) : Reserve Capacity is a battery industry rating, defining a battery's ability to power a vehicle with an inoperative alternator or fan belt.
The rating is the number of minutes a battery at 26.7 °C(80 °F) can be discharged at 25 amps and maintain a voltage of 10.5 volts for a 12 volt battery.
The higher the reserve rating, the longer your vehicle can operate should your alternator or fan belt fail.
Item | Specification | |
Rated voltage | 12 V, 0.9 kW | |
The number of pinion teeth | 10 | |
Performance [No-load, 11.5 V] | Ampere | Max. 60 A |
Speed | Min. 5500 rpm |
Item | N.m | kgf.m | lb-ft |
Ignition coil installation bolt | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 |
Spark plug installation | 14.7 ~ 24.5 | 1.5 ~ 2.5 | 10.9 ~ 18.1 |
Alternator installation bolt [12 mm (0.47 in.)] | 19.6 ~ 26.5 | 2.0 ~ 2.7 | 14.5 ~ 19.5 |
Alternator installation bolt [14 mm (0.55 in.)] | 29.4 ~ 41.2 | 3.0 ~ 4.2 | 21.7 ~ 30.4 |
Alternator B-terminal cable installation nut | 9.8 ~ 14.7 | 1.0 ~ 1.5 | 7.2 ~ 10.8 |
Battery (+) terminal tightening nut | 7.8 ~ 9.8 | 0.8 ~ 1.0 | 5.2 ~ 8.7 |
Battery (-) terminal tightening nut | 7.8 ~ 9.8 | 0.8 ~ 1.0 | 5.2 ~ 8.7 |
Battery mounting bracket bolt | 8.8 ~13.7 | 0.9 ~1.4 | 6.5 ~10.1 |
Battery tray installation bolt | 8.8 ~13.7 | 0.9 ~1.4 | 6.5 ~10.1 |
Starter installation bolt | 49.0 ~ 63.7 | 5.0 ~ 6.5 | 36.2 ~ 47.0 |
Starter B-terminal cable installation nut | 9.8 ~ 11.8 | 1.0 ~ 1.2 | 7.2 ~ 8.7 |