Removal
warning
●

DON’T remove the camshaft position sensor during engine running or right after engine stops, or a scald by the flowed out engine oil may occur.

[Bank 1 / Intake]
1.

Turn the ignition switch OFF and disconnect the battery negative (-) cable.

2.

Disconnect the camshaft position sensor connector (B) after removing the clip (A).

3.

Remove the installation bolt (C), and then remove the sensor.

[Bank 1 / Exhaust]
4.

Turn the ignition switch OFF and disconnect the battery negative (-) cable.

5.

Disconnect the camshaft position sensor connector (B) after removing the clip (A).

6.

Remove the installation bolt (C), and then remove the sensor.

Яндекс.Метрика