Inspection
Throttle Position Sensor (TPS)
1.

Connect the GDS on the Data Link Connector (DLC).

2.

Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T.

Throttle Angle

Output Voltage (V)

TPS 1

TPS 2

C.T

0.5

4.5

W.O.T

4.41

0.59

ETC Motor
1.

Turn the ignition switch OFF.

2.

Disconnect the ETC module connector.

3.

Measure resistance between the ETC module terminals 1 and 2.

4.

Check that the resistance is within the specification.

Specification: Refer to “Specification”

Яндекс.Метрика