Removal
warning
●

DON’T remove the camshaft position sensor while the engine is running or right after engine is turned off. The part and engine oil is hot and can cause burns.

[Bank 1 / Intake]
1.

Turn the ignition switch OFF and disconnect the battery negative (-) cable.

2.

Disconnect the camshaft position sensor connector (A).

3.

Remove the installation bolt (B), and then remove the sensor.

[Bank 1 / Exhaust]
4.

Turn the ignition switch OFF and disconnect the battery negative (-) cable.

5.

Disconnect the camshaft position sensor connector (A).

6.

Remove the installation bolt (B), and then remove the sensor.

Яндекс.Метрика