Release the residual pressure in fuel line.

(Refer to Fuel Delivery System - “Release Residual Pressure in Fuel Line”)

Turn the ignition switch OFF, and then remove battery (-) cable.

Disconnect the low pressure fuel feed tube quick-connector (A).

Disconnect the vapor hose (A) which is connected from the PCSV.

Remove the fuel tank.

(Refter to Fuel Delivery System - "Fuel Tank")

Remove the vapor tube and low fuel line fixing clip (A) by using a common driver.

Remove the installation nuts, and then push the heat protector in the direction of an arrow.

Remove the installation bolts (A), and then remove the fuel line fixing clip (B).

Open the fuel line fixing clip with the (-) driver.

Remove the fuel line (A) under the vehicle. Be careful not to damage the fuel line.