4.
Remove the wiring harness bracket installation bolt (B).
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Release the residual pressure in fuel line. (Refer to Fuel Delivery System - “Release Residual Pressure in Fuel Line” )
When removing the fuel pump fuse, a Diagnostic Trouble Code (DTC) may occur. Delete the code with the GDS after completion of “Release Residual Pressure in Fuel Line” work.
Disconnect the injector connector (A).
Remove the wiring harness bracket installation bolt (B).
Remove the installation nuts (A), and then disconnect the fuel feed tube (B).
Remove the installation bolts (A), and then remove the delivery pipe & injector assembly (B) from the engine
Remove the fixing clip (A), and then separate the injector from the delivery pipe.
