Release the residual pressure in fuel line.

(Refer to Fuel Delivery System - “Release Residual Pressure in Fuel Line”)

Turn the ignition switch OFF, and then remove battery (-) cable.

Remove the installation nut (B), and then disconnect the fuel feed tude (A).

Disconnect the vapor hose (A) which is connected from the PCSV.

Lift the vehicle.

Remove the fuel tank.

(Refter to Fuel Delivery System - "Fuel Tank")

Remove the vapor tube and low fuel line fixing clip (A) by using a common driver.

Remove the installation nuts, and then push the heat protector in the direction of an arrow.

Remove the installation bolts (A), and then remove the fuel line fixing clip (B).

Remove the fuel & brake line protector (A) disconnecting the fixing clip.

Remove the fuel line.