Remove the engine cover.

Disconnect the battery negative terminal.

Disconnect the wiring connectors and harness clamps, and then remove the wiring and protectors from the cylinder head and the intake manifold.

(1)

The intake oil control valve (OCV) connector (A)

(2)

The exhaust oil control valve (OCV) connector (A)

(3)

The alternator connector (A)

(4)

The ignition coil connectors (A)

(6)

The exhaust camshaft position sensor (CMPS) connector (B)

Disconnect the positive crankcase ventilation (PCV) hose (A).

Disconnect the breather hose (A).

Remove the ignition coils.

(Refer to Engine Electrical System - “Ignition Coil”)

Remove the engine oil level gauge.

(Refer to Lubrication System - “Oil Level Gauge & Pipe”)

Remove the cylinder head cover (A).