1.
Remove the valves.
(1)
Using the SST (09222-3K000, 09222-3K100), compress the valve spring and remove the retainer lock (A).
caution
When installing the SST, insert the front support (A) directly into the bolt hole on the cylinder head.
note
Do not press valve retainer more than 12 mm (0.47 in.).
(2)
Remove the spring retainer (B).
(3)
Remove the valve spring (C).
(4)
Remove the valve (D).
(5)
Using needle-nose pliers, remove the valve stem seal (E).
note
Do not reuse the valve stem seals.
