3.
Disconnect the wiring connectors and harness clamps and remove the connector brackets around the cylinder head cover.
Use fender covers to avoid damaging painted surfaces.
To avoid damage, unplug the wiring connectors carefully while holding the connector portion.
Mark all wiring and hoses to avoid misconnection.
Remove the engine cover.
Disconnect the battery negative terminal.
Disconnect the wiring connectors and harness clamps and remove the connector brackets around the cylinder head cover.
Remove the air cleaner assembly.
(Refer to Intake And Exhasut System - "Air Cleaner")
Remove the high pressure fuel pump.
(Refer to Engine Control/Fuel System - "High Pressure Fuel Pump")
Remove the ignition coils.
(Refer to Engine Electrical System - “Ignition Coil”)
Remove the engine oil level gauge.
(Refer to Lubrication System - “Oil Level Gauge & Pipe”)
Remove the cylinder head cover (A).
Unfasten the bolts in the sequence as shown.
