Removal and Installation
Without Hydraulic Power Steering System
1.

Disconnect the battery negative terminal.

2.

Loosen the alternator mounting bolts (A) and then turn the adjusting bolt (B) counterclockwise to loose the drive belt tension.

Tightening torque

M8 bolt :

19.6 ~ 26.5 Nm (2.0 ~ 2.7 kgf.m, 14.5 ~ 19.5 Ib-ft)

M10 bolt :

29.4 ~ 41.2 Nm (3.0 ~ 4.2 kgf.m, 21.7 ~ 30.4 Ib-ft)

3.

Remove the drive belt (A).

[With A/C]
[Without A/C]
4.

Install in the reverse order of removal.

With Hydraulic Power Steering System
1.

Disconnect the battery negative terminal.

2.

Loosen the drive belt by turning the auto tensioner counterclockwise then remove the drive belt (A).

[With A/C]
[Without A/C]
3.

Install in the reverse order of removal.

Яндекс.Метрика