Removal and Installation
1.

Remove the engine cover.

2.

Disconnect the battery "-" terminal.

3.

Remove the air duct and air cleaner assembly.

Tightening torque

Hose clamp bolt:

2.9 ~ 4.9 N.m (0.3 ~ 0.5 kgf.m, 2.1 ~ 3.6 lb-ft)

Air cleaner assembly bolts:

3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 Ib-ft)

(1)

Remove the air duct (A).

(2)

Disconnect the breather hose (B) and air intake hose (C).

(3)

Remove the air cleaner assembly (D).

note

Hose clamp is fitted by matching, from the hose stopper plate.

4.

Install in the reverse order of removal.

Air Cleaner Element Replacement
1.

Open the air cleaner cover by unhooking the clamps.

2.

Replace the air cleaner element (A) with a new one.

note

If there are foreign substances inside the air cleaner assembly, wipe the inside of the air cleaner assembly and then replace the air cleaner element.

3.

Close the air cleaner cover by hooking the clamps.

Яндекс.Метрика