1.
Turn the crankshaft pulley clockwise, and align its groove with the timing mark of the timing chain cover.
Turn the crankshaft pulley clockwise, and align its groove with the timing mark of the timing chain cover.
Remove the timing chain cover.
(Refer to Timing System - "Timing Chain Cover")
Align the timing marks of the camshaft sprocket with the upper surface of the cylinder head to make No.1 cylinder be positioned at TDC.
Check the dowel pin of the crankshaft for facing upside of the engine at this monent.
Put paint marks on the timing chain links(3 places) that meet with the timing marks of the camshaft sprockets(In, Ex : 2) and the crankshaft sprocket.
Remove the hydraulic tensioner (A).
Before removing the tensioner, fix the piston of the tensioner with a pin through the hole (B) at TDC.
Remove the Timing Chain Tensioner Arm (A) and Guide (B).
Remove the timing chain (A).
