3.
Disconnect the over flow hose (A).
Disconnect the battery "-" terminal.
Remove the air cleaner assembly.
(Refer to Intake And Exhaust System-"Air Cleaner")
Disconnect the over flow hose (A).
Disconnect the cooling fan coonector (A).
Remove the filler neck bolts (A).
Tightening torque :
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)
Remove the cooling fan assembly (A).
Tightening torque :
4.9 ~ 7.8 N.m (0.5 ~ 0.8 kgf.m, 3.6 ~ 5.8 lb-ft)
Install in the reverse order of removal.
Disconnect the battery "-" terminal.
Disconnect the wire harness connector (A) and the fan motor connector (B).
Remove the resister (A) from the cooling fan shroud.
Tightening toraue :
1.8 ~ 2.5 N.m (0.18 ~ 0.25 kgf.m, 1.3 ~ 1.8 lb-ft)
Install in the reverse order of removal.
