This DTC B102052 is set when variant coding is incorrectly performed as if TPMS option is installed on the vehicle even though real vehicle has not TPMS on the CAN BUS.
Item | Conditions for setting DTC | Possible Cause | |
DTC Strategy |
•
Check CAN communication | 1. Check option information and performance of cluster 2. Perform culster coding procedure 3. Check TPMS ECU 4. Check CAN line 5. Check Cluster | |
Enable Conditions |
•
IG key "ON" | ||
Case1 | ThresholdValue |
•
TPMS scan error | |
DTC ErasingTime |
•
In case of correctly performed coding procedure | ||
Case2 | ThresholdValue |
•
End of line has TPMS option information even though TPMS has not been detected on the CAN BUS | |
DTC ErasingTime |
•
Erased DTC after solved problem | ||
Diagnostic Time |
•
2,000㎳ | ||
