7092895

Component Inspection

■ Perform PCSV

Connect GDS to Data Link Connector(DLC).

IG KEY "ON" & ENG "OFF".

Perform "Actuation Test" for PCSV.

■ Inspection PCSV

IG Key "OFF"

Disconnect PCSV connector.

Measure resistance between power and control terminal of the PCSV. (Component Side)

Specification : Approx. 24 ± 2 [20°C(68 °F)]

■ Confirm Part Inspection

Does the PCSV operate properly? (Check variation)

	▶ Go to "Verification of Vehicle Repair" procedure.
	▶ Substitute with a known-good PCSV and check for proper operation. If the problem is corrected, replace PCSV and then go to "Verification of Vehicle Repair" procedure.