7097758

Measure resistance between power and control terminals of injector connector.(Component side)

Specification :

Temp.(℃)	Temp.(℉)	Resistance (Ω)
20	68	13.8~15.2

Is the measured resistance within specification ?

	▶ Check for poor connection between PCM/ECM and component: backed out terminal, improper mating, broken locks or poor terminal to wire connection. Repair as necessary and go to "Verification of Vehicle Repair" procedure.
	▶ Check injector for contamination, deterioration, or damage. Substitute with a known-good injector and check for proper operation. If the problem is corrected, replace injector and then go to "Verification of Vehicle Repair" procedure.