The PCM/ECM sets DTC P0335 when the number of crankshaft teeth during one revolution is incorrect or crankshaft signal is missing while camshaft signal is detected.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Signal plausibility check | 1. Open or short in signal, ground or power supply circuit 2. Poor connection or damaged harness 3. Damage to the connecting flange/flywheel 4. Misadjust crankshaft and camshaft pulley position 5. Faulty CKP sensor |
Enable Conditions |
•
Camshaft signal valid | |
Threshold Value |
•
No crankshaft teeth detected after 3 camshaft edge transitions. | |
Diagnostic Time |
•
3 rev. | |
MIL On Condition |
•
2 Drive Cycles |
