If intake manifold pressure is lower than the minimum threshold value or higher than the maximum threshold value according to RPM and TPS under normal TPS signal input condition, ECM/PCM sets DTC P0106.
Item | Detecting Condition | Possible Cause | |
DTC Strategy | Case 1 |
•
Compare with model | 1. Poor connection 2. MAPS |
Case 2 |
•
Compare with model | ||
Enable Conditions |
•
10 kPa < Intake manifold pressure < 300 kPa | ||
Threshold Value | Case 1 |
•
MAP – Model MAP (High side) > 4.0 kPa | |
Case 2 |
•
MAP – Model MAP (Low side) < -4.0 kPa | ||
Diagnosis Time |
•
- | ||
MIL On Condition |
•
2 trips | ||
