If the input signal voltage of IATS is higher than the maximum threshold value, ECM/PCM sets DTC P0113
.(In this case, the input signal voltage is the maximum threshold value.)
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Signal check, high | 1. Poor connection 2. Open or short to power in signal circuit 3. Open in ground circuit 4. IATS |
Enable Conditions |
•
ECT at Start ≥ - 30℃
•
After ECT > 70℃ & Air mass < 20 kg/h & Vehicle speed < 6.2mph condition for 10 sec. | |
Threshold Value |
•
Input signal voltage of IATS > 4.93V(< -34.8 ℃) | |
Diagnosis Time |
•
- | |
Mil On Condition |
•
2 trips |
