System Inspection
■ Check leakage or clog of air
1.

Check contamination, clog and installation of gasket

▶ Any damage or installation of throttle body gasket.

▶ Any damage or installation of gasket between intake manifold and surge tank.

▶ Clog or contamination of intake manifold and injector by foreign materials.

▶ Contamination and open stuck between surge tank and PCSV by foreign materials.

▶ Any damage or contamination of HO2S(S1)_UP by foreign materials.

2.

Has a problem been found ?

▶ Go to " Check Fuel Line" as follows.

▶ Repair or replace as necessary and then, go to "Verification of Vehicle Repair" procedure.

■ Check Fuel Line
3.

Check Clog, contamination and installation of Fuel Line as follows.

▶ Connection for each connectors in Fuel Line.

▶ Damage, interference and installation of vacuum hose connected to Fuel Line.

▶ Bend, Leakage and squeeze of pipe in Fuel Line.

▶ Go to "Check Fuel Pressure" as follows.

▶ Repair or replace as necessary and then, go to "Verification of Vehicle Repair" procedure.

■ Check Fuel Pressure.
4.

IG KEY "OFF".

5.

Connect fuel pressure gauge on the fuel filter with fuel pressure gauge adaptor.

6.

Start engine again and measure fuel pressure.

Specification : Approx. 3.5㎏/㎠

7.

Is the fuel pressure normal ?

▶ Go to "Component Inspection" procedure.

▶ Check any damage of fuel return hose or pipe.

▶ Check any stuck of the valve in the fuel pressure regulator.

▶ Repair or replace as necessary and then, go to 'Verification of Vehicle Repair" procedure.

Яндекс.Метрика