If the sensor input signal is lower than 0.2V or the range of the MAP is lower than 10 kPa(0.1 bar/1.45 psi), the ECM sets DTC P0107.
Item | Detecting Condition | Possible Cause | |
Case 1 | DTC Strategy |
•
Signal check, low | 1. Poor connection 2. Short to ground in signal circuit 3. MAPS |
Enable Conditions |
•
Engine speed > 80 rpm | ||
Threshold Value |
•
Sensor voltage < 0.2 V | ||
Case 2 | DTC Strategy |
•
Out-of-range low | |
Enable Conditions |
•
- | ||
Threshold Value |
•
MAP < 10 kPa(0.1 bar/1.45 psi) | ||
Diagnostic Time |
•
Continuous | ||
MIL ON Condition |
•
2 driving cycles | ||
