If the sensor input signal is higher than 4.8V or the range of the MAP is higher than 110 kPa(1.1 bar/15.95 psi), the ECM sets DTC P0108.
Item | Detecting Condition | Possible Cause | |
Case 1 | DTC Strategy |
•
Signal check, high | 1. Poor connection 2. Short to ground in signal circuit 3. MAPS |
Enable Conditions |
•
Engine speed > 80 rpm | ||
Threshold Value |
•
Sensor voltage > 4.8 V | ||
Case 2 | DTC Strategy |
•
Out-of-range high | |
Enable Conditions |
•
- | ||
Threshold Value |
•
MAP > 110 kPa(1.1 bar/15.95 psi) | ||
Diagnostic Time |
•
Continuous | ||
MIL ON Condition |
•
2 driving cycles | ||
