If the measured temperature is lower than the minimum threshold value, the ECM sets DTC P0113.(In this case, the input signal voltage is the maximum threshold vaue.)
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Signal check, high | 1. Poor connection 2. Open or short to power in signal circuit 3. IATS | |
Enable Conditions | Case 1 |
•
ECT at Start ≥ -30 ℃(-22 °F) | |
Case 2 |
•
(A)ECT at Start < -30 ℃(-22 °F)
•
(B)ECT > 70 ℃(158 °F)
•
(C)Air mass < 20 kg/h
•
(D)Vehicle speed < 6.2 mph(9.97 km/h)
•
After (A) + (B) + (C) + (D) for 10 sec. | ||
Threshold Value |
•
Voltage > 4.93 V(< -34.8 ℃/-30.64 °F) | ||
Diagnostic Time |
•
Continuous | ||
MIL ON Condition |
•
2 driving cycles | ||
