4.
Engine start. And check the signal waveforms.
Specification : CKPS & CMPS(Exhaust side) synchronization - There are about 16~17 teeth between the CKPS missing tooth and CMPS signal.
IG "OFF".
Select "Oscilloscope" in the menu, and connect channel A of GDS with signal terminal of CKPS harness connector.
Connect Channel B of GDS with power or signal terminal of CMPS harness connector.
Engine start. And check the signal waveforms.
Specification : CKPS & CMPS(Exhaust side) synchronization - There are about 16~17 teeth between the CKPS missing tooth and CMPS signal.
Does the CKPS & CMPS(Exhaust side) synchronize properly? (Check variation)
 | ▶ Go to "Verification of Vehicle Repair" procedure. |
 | ▶ Synchronize CVVT system and check for proper operation. If the problem is corrected, then go to "Verification of Vehicle Repair" procedure. |
