The ECM monitors the CMP(Intake) circuit for a noisy signal from the camshaft position sensor. If the ECM detects an unexpected signal, it sets DTC P0341.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
CMP signal unplausible | 1. Poor connection 2. Abnormal assembling state 3. CMPS |
Enable Conditions |
•
No CKP sensor error
•
Gap of CKP sensor wheel detected | |
Threshold Value |
•
Unplausible signal per camshaft rev. > 4 times | |
Diagnostic Time |
•
Continuous | |
MIL ON Condition |
•
2 driving cycles |
