Check turbocharger wastegate solenoid valve damage.

Check wastegate adjusting rod damage.

Check wastegate solenoid valve stuck.

Check wastegate stuck closed.

Chech wastegate control hose open or plugged.

Check wastegate adjustment.

Connect GDS to Data Link Connector(DLC).

IG KEY "ON" & ENG "OFF".

Perform "Actuation Test" for wastegate solenoid valve.

IG Key "OFF".

Disconnect Wastegate Solenoid Valve connector.

Measure resistance between power and control terminal of the Wastegate Solenoid Valve. (Component Side)

Does the wastegate operate properly? (Check variation)

	▶ Go to "Verification of Vehicle Repair" procedure.
	▶ Substitute with a known-good wastegate and check for proper operation. If the problem is corrected, replace wastegate and then go to "Verification of Vehicle Repair" procedure.