If a misfire exists that exceeds the threshold value, P0300 is set.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Engine roughness through crankshaft speed fluctuation | 1. Poor connection 2. Ignition system 3. Fuel system 4. Intake/exhaust air system 5. Ignition timing 6. Injector | |
Case1 | Enable Conditions |
•
Engine speed is between 400rpm and 4520rpm
•
Engine load is higher than Zero torque line | |
Threshold Value |
•
Misfire rate is greater than 3.25% pre 1000 revolutions | ||
MIL ON Condition |
•
2 driving cycle | ||
Case2 | Enable Conditions |
•
Intake air temperature is higher than -8.3℃
•
Coolant temperature is higher than -8.3℃ | |
Threshold Value |
•
Rate of misfire per 200 revolutions is greater than 2.5% in driving condition | ||
MIL ON Condition |
•
Immediately (Blink) | ||
