Many malfunctions in the electrical system are caused by poor harness(es) and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.

Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.

Has a problem been found?

	▶ Repair as necessary and go to "Verification of Vehicle Repair" procedure.
	▶ Go to " Rear Fog Lamp Circuit Inspection" procedure.

IG "OFF", disconnect battery (-) terminal.

Disconnect SJB, Rear Fog Lamp connector.

Measure resistance between the Rear Fog Lamp terminal of SJB harness connector and chassis ground.

Is the measured resistance within specification?

	▶ Substitute with a known - good SJB and check for proper operation. If the problem is corrected, replace the SJB and go to "Verification of Vehicle Repair" procedure.
	▶ Repair short to ground in circuit of Rear Fog Lamp, and go to "Verification of Vehicle Repair" procedure.