If the MDPS ECM doesn't get some signals from cluster, it sets C1628.
Item | Detecting Condition | Possible cause |
DTC Strategy |
•
Cluster CAN message monitoring | 1. Poor connection 2. Connector disconnected 3. Open or short in the circuit 4. Cluster |
Enable conditions |
•
IG KEY " ON" Or Engine " ON " | |
Threshold value |
•
The messages from cluster was not received within the last 500msec
•
7.5V < IGN voltage< 16.5V | |
Fail Safe |
•
Motor : ON
•
Relay : ON
•
EPS Warning lamp : OFF |
