Monitor GDS Data
1.

Connect GDS to Data Link Connector(DLC).

2.

Ignition "ON" & Engine "ON".

3.

Select "Current Data" mode and monitor "SPORTS MODE SELECT S/W, SPORTS MODE UP S/W, SPORTS MODE DOWN S/W" parameters.

4.

Change shft lever to "Sports Mode".

Fig 1) "D" range

Fig 2) "Sports Mode ON"

Fig 3) "Sports Mode Up Switch ON"

Fig 4) "Sports Mode Dwon Switch ON"

5.

Is Sports Mode Switch working within specification?

▶ Fault is intermittent caused by poor contact between TCM and Sensor, and DTC was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair as necessary and go to "Verification Vehicle Repair" procedure.

▶ Go to "Terminal and Connector Inspection" procedure.

Яндекс.Метрика