Component Inspection
■ Pressure control solenoid valve(LP-VFS) Inspection
1.

Ignition off & Engine Off.

2.

Disconnect "ATM solenoid valve connector.

3.

Measure a resistance between "Pressure control solenoid valve(LP-VFS) " terminal and power at ATM solenoid valve connector.

Specification : 5.1 ± 0.3 Ω(25℃)

4.

Is measured resistance within specification?

▶ Substitute with a known-good TCM and check for proper operation.If the problem is corrected, replace TCM and then go to "Verification of Vehicle Repair" procedure.

▶ Substitute with a known-good Pressure control solenoid valve(LP-VFS) and then go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика