1.
Using a screwdriver or remover, remove the tail gate upper trim (A).
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
Using a screwdriver or remover, remove the tail gate upper trim (A).
Install in the reverse order of removal.
Replace any damaged clips.
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
Using a screwdriver or remover, remove the tail gate trim (A).
Install in the reverse order of removal.
Replace any damaged clips.
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
Remove the tail gate upper trim.
Remove the tail gate trim.
After loosening the mounting screw, then remove the tail gate side trim (A).
Install in the reverse order of removal.
Replace any damaged clips.
