3.
After loosening the mounting bolts, then remove the trunk lid assembly (B).
Tightening torque:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Wear gloves to protect hands from injury.
When removing and installing the trunk lid, an assistant is necessary.
Remove the trunk lid trim.
(Refer to Trunk Lid - "Trunk Lid Trim")
Disconnect the connectors and trunk lid wiring harness (A).
After loosening the mounting bolts, then remove the trunk lid assembly (B).
Tightening torque:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Install in the reverse order of removal.
Make sure the trunk lid locks/unlocks and opens/closes properly.
Adjust the trunk lid alignment.
Make sure the connectors are connected in properly.
Replace any damaged clips.
