1.
Install the cylinder head cover.
(1)
The hardening sealant located on the upper area between timing chain cover and cylinder head should be removed before assembling cylinder head cover.
(2)
After applying sealant, it should be assembled within 5 minutes.
Bead width : 2.0 ~ 3.0mm(0.07 ~0.11 in.)
Sealant : LOCTITE 5900H
(3)
Install the cylinder head cover (A) with a new gasket (B).
caution
Do not reuse the disassembled gasket.
(4)
Tighten the cylinder head cover bolts with the order and steps.
Tightening torque
1st step:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
2nd step: 7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)
