1.
Install the new gasket and water pump(A).
Tighten the bolts with the order below.
Tightening torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
Install the new gasket and water pump(A).
Tighten the bolts with the order below.
Tightening torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
Install the water pump pulley (A).
Tightening torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
Tighten the bolts diagonally when installing.
Install the drive belt.
(Refer to Timing System - "Drive Belt")
Fill with engine coolant.
Start engine and check for leaks.
Recheck engine coolant level.
