Removal
note

Disassembly of the thermostat would have an adverse effect, causing a lowering of cooling efficiency.

1.

Drain the engine coolant so that its level would be under the thermostat height.

(Refer to Cooling System - "Coolant")

2.

Remove the radiator lower hose (A).

3.

Remove the water inlet fitting (A) and thermostat (B).

Tightening torque :

18.6 ~ 23.5 N.m (1.9 ~ 2.4 kgf.m, 13.7 ~ 17.4 lb-ft)

4.

Install in the reverse order of removal.

note

Place the thermostat with the jiggle valve (C) upward.

5.

Fill with the engine coolant.

(Refer to Cooling System - "Coolant")

6.

Start engine and check for leaks.

Яндекс.Метрика