Remove the fuel pump (Refer to “Fuel Pump” in this group).

Disconnect the electric pump wiring connector (A) and the fuel sender connector (B).

Remove the head assembly (A) after releasing the cushion fixing clip (B).

Disconnect the fuel tube quick-connectors (C).

Remove the fuel sender (A) in the direction of an arrow.

Disconnect the fuel tube connector (A).

Remove the cut valve (A) after releasing hooks (B).

Remove the reservior-cup (B) after releasing the fixing hooks (A).

Release the fixing hooks, and then remove the pre-filter (A).

Remove the electric motor pump motor (B) from the fuel filter (C) by pulling it in down direction.

Install in the reverse order of removal.